Things To Consider Before Buying

Natural stone tiles might not be the most convenient material to maintain and use for walls and flooring, but they’re definitely one of the most rewarding both in terms of quality as well as return on investment as it is widely believed that a natural stone flooring or wall will boost its value. home. Alongside these benefits natural stone tiles are very durable, and in most cases, with some time and attention, they will last as long as the house does.

As previously mentioned the fact that there is probably more work involved in the installation and maintenance of natural stole tiles than in alternatives like wood flooring.

The reason is due to the fact that stone is a very durable material that is more difficult to cut than a wooden board or even a ceramic tile, which is cut, then broken. In addition to this it is possible to smooth the surface of the sub-floor that your tile will sit in case it is uneven or cracked. Visit:-

This can be accomplished usually using a good quality self-leveling compound, available from all respectable flooring and tile specialists.

When you are preparing natural stone tiles for laying in the future, make sure you take the time inspecting them both for surface scratches and chips.

Typically, natural stone tiles come with a light wax coating to shield them from harm during transit. Don’t be concerned about cleaning the tiles prior to when they are laid – this will have to be done after they’ve laid and grouted. It is best to make use of several tiles before lay them down, to allow you to create a random and harmonious aesthetic.

When it comes to creating natural stones, the most efficient way to cut them is to use an electric tile wet cutter. Apart from being quite thick and strong and durable, they also are a natural material and will naturally have defects and veins, making it unsuitable to be cut using manual tile cutters, which is more likely to shatter the tile, rather than break it. Be aware that cutting with water is messy and can result in substantial amounts of dust and debris. Therefore, try to perform the cutting outdoors, or in a secure area. Always ensure that you wear hand and eye protection along with appropriate clothing. Also, take out and power outlets or electrical equipment that could get wet in the process.

When you mark a cutline on natural stone tiles, you might prefer using a crayon as opposed to pencil, which is most likely to leave no substantial impression across the surface. Take care to go extra slow as you get to the final stage of your cut because when you cut too fast and force the tile through it could break, making it unusable. If you are cutting a especially large tile, you should try to ask someone else to aid you in stabilizing the tile while cutting because the weight of any piece of tile can start to break the entire piece and cause a snap as you cut into the tile.

Laying your natural stone tiles can be a simple process involving the use of tile adhesive for fixing the tiles to the floor. Certain types of highly porous tiles like travertine need back-buttering adhesive before they’re laid. This is also important when your tiles are prone to cracks that are visible on the underside since ‘buttering’ helps to seal the crack and strengthen it as well. It’s widely accepted in any circumstance. Make sure you are careful when installing natural stone tiles, as they can be extremely heavy. Carefully reduce stretch that’s unnecessary, to lessen the chance of back strain. You can use a spirit level to help determine if your tile’s level prior proceeding to the next as well as gentle tapping with a small mallet can help to boost the corners that are too high.

Grouting your natural tile after it’s been laid is a fairly simple process. Make sure to wear a mask while mixing the grout of your tile as it’s a dusty procedure. Make sure to mix your grout with clean, cold water. If you’re installing your tiles in a bathroom or kitchen and kitchen, it’s best to choose a tile grout that features anti-bacterial agents to reduce the growth of mould and mildew. Using the edge of a trowel, firmly fill gaps between the tiles (created by using spacers) and then smooth over the entire surface at an angle of 45 degrees to the floor. A grout profiling tool can assist after applying it to level the fill off, and remove any excess.

Caring for your natural stone tiles, it is important to keep in mind that before you complete your tiling job it is necessary to seal the tiles, to ensure that the stone is not stained. The seal must be applied after the tiles are cleaned and any residual dust or adhesive has been removed with a residual remover. After applying and removing residue removers, a sealing agent can be applied to prevent materials and liquids from entering the pores of the stone, and leaving damage. This seal needs to be regularly maintained in order to ensure that the tiles remain in good working order. It could be added through the use of enhancing products to enhance the natural grain and colors that the stone has.

Leave a comment

Your email address will not be published. Required fields are marked *